+8618268307911
Fluid Power Hydraulics Oring

Fluid Power Hydraulics Oring

Size: Standard and Custom made
Material: Nitrile/NBR/Buna, FKM/FPM, Silicone, EPDM, HNBR, NR, FFKM, FEPM, etc.
Send Inquiry
Product Details ofFluid Power Hydraulics Oring

Zhejiang Jiacheng New Material Co., Ltd. is one of the leading manufacturers and suppliers of fluid power hydraulics oring in China, also supports customized service. Welcome to wholesale bulk high quality fluid power hydraulics oring in stock here from our factory. If you have any enquiry about quotation and free sample, please feel free to email us.

 

_01

Size: Standard and Custom made

Material: Nitrile/NBR/Buna, FKM/FPM, Silicone, EPDM, HNBR, NR, FFKM, FEPM, etc.

 

What material fluid power hydraulics Oring is

When there is no hydraulic pressure, the elastic contact surface of the O-ring generates pre contact pressure to achieve initial sealing. After the sealing chamber is filled with pressure oil, under the action of hydraulic pressure, the O-ring squeezes towards one side of the groove, and the contact pressure on the sealing surface increases, improving the sealing effect.

 

When installing any shape of sealing ring, it is necessary to ensure an appropriate pre compression shrinkage. If it is too small, it cannot be sealed. If it is too large, it will increase friction and be easily damaged. Therefore, the groove size and surface accuracy for installing the sealing ring must be strictly guaranteed according to the data provided in the relevant manual.

 

In dynamic sealing, when the pressure is greater than 10MPa, the O-ring will be squeezed into the gap and damaged. Therefore, a PTFE or nylon retaining ring made of PTFE or nylon should be installed on the low-pressure side of the O-ring, with a thickness of 1.25~2.5mm. When subjected to high pressure in both directions, retaining rings should be added on both sides.

 

The selection of type 0 sealing display material is of great significance for its sealing performance and service life. The performance of the material directly affects the performance of the O-ring. In addition to the general requirements for sealing ring materials, the O-ring should also pay attention to the following conditions:

(1) Rich in elasticity and resilience

(2) Appropriate mechanical strength, including expansion strength, elongation, and tear resistance

(3) Stable performance, less prone to swelling in the medium, and low thermal shrinkage effect (Joule effect)

(4) Easy to process and shape, and able to maintain precise dimensions

(5) Non corrosive contact surfaces, non polluting media, etc.

_02

_03

_04

_05

 

_07

 

Hot Tags: fluid power hydraulics oring, China fluid power hydraulics oring manufacturers, suppliers, factory, Rubber Heat Resistant Orings, High Temperature O Ring Seals, O Ring Materials, High Density O-Rings, O Ring Gasket, High Pressure O Ring Material

Send Inquiry

(0/10)

clearall