AED O Ring
Zhejiang Jiacheng New Material Co., Ltd. is one of the leading manufacturers and suppliers of aed o ring in China, also supports customized service. Welcome to wholesale bulk high quality aed o ring in stock here from our factory. If you have any enquiry about quotation and free sample, please feel free to email us.

Premium NORSOK M-710 AED O-Rings & Anti-Explosive Decompression Seals
Conventional elastomeric seals are susceptible to catastrophic structure failure due to Rapid Gas Decompression (RGD) in ultrahigh pressure (UHP) and high-temperature subsea exploration, gas processing, and offshore drilling applications.
Our innovative high-density compound formulas are used in the bespoke engineering of our engineering-grade AED O-rings (Anti-Explosive Decompression O-Rings). Our Anti-Explosive Decompression Seal Materials, certified under international standards such as NORSOK M-710 Rev 3, ISO 23936-2, and NACE TM0297, offer maximum cross-link density to prevent intra-elastomer micro-foaming, internal blistering, and explosive rupture under abrupt system depressurization up to 15,000+ PSI.
Technical Analysis: Elastomer Explosive Tear Logic & RGD Failure Mechanisms
When choosing high-integrity seals for oilfield, upstream valve, and compressor systems, it is essential to comprehend how gas ingress damages conventional elastomeric O-rings:
1. Molecular Permeation at High Pressure
Small-molecule gasses like carbon dioxide (CO2), hydrogen sulfide (H2S), methane (CH4), and supercritical fluids infiltrate into the cross-linked polymer matrix of the O-ring under high system operating pressures (usually > 1,000 PSI/7 MPa) until full thermodynamic saturation is attained.
2. Quick System Depressurization (The Phase of Decompression)
External ambient pressure almost rapidly disappears when system pressure lowers suddenly (e.g., emergency shutdown, fast valve opening, or choke manifold cycling). But the gas trapped in the elastomer matrix's interior void regions stays at its initial high pressure.
3. Internal Crack Nucleation and Micro-Void Expansion
According to ideal gas characteristics, the interior supersaturated gas experiences severe volumetric expansion as it attempts to escape. Standard rubbers have microscopic voids that serve as focal sites for stress. Micro-fissures start to appear when internal gas pressure surpasses the elastomer's local tear strength (modulus of elasticity).
4. Explosive Failure, Blown-Out Structure, and Internal Blistering
Adjacent microcracks spread quickly due to continuous gas expansion, resulting in internal blistering, structural cleavage, surface pitting, and total explosive tearing. Complete fluid containment leakage occurs when the seal loses its dimensional memory and structural integrity.
By using ultrahigh filler reinforcement, high cross-link density, and optimized glass transition temperature (Tg), our certified NORSOK M-710 AED O-ring compound prevents gas aggregation and resists tear initiation even at extreme depressurization rates exceeding 100 bar/min.
NORSOK M-710/ISO 23936-2 AED Qualification Information
NORSOK M-710 Annex B Decompression Test Rating Standard
Under stringent laboratory circumstances (100% CO2/Sour Gas mix, 150°C to 200°C, 150 bar to 200 bar, 10-cycle rapid release), all of our RGD-grade elastomers go via thorough multi-cycle decompression qualification testing. The ISO 23936-2/NORSOK M-710 criteria (Scale 0 to 5) are used to rate seal deterioration.
- Grade 0: No blisters or internal cracks (100% Pass)
- Grade 1: 100% Pass with a maximum of 4 tiny cracks under 0.5 mm
- Consistent Grade 0/Grade 1 Rating (zero catastrophic failure throughout all cycles) is the SJK AED O-Ring Standard Qualification.

NORSOK M-710/ISO 23936-2 AED Material Selection Guide
- HNBR (Hydrogenated Nitrile Rubber) - AED Grade
Temp Range: -35°C to +160°C (-31°F to +320°F)
Pressure Rating: Up to 10,000 PSI
Media Compatibility: Crude oil, sour gas (H2S up to 10%), water/steam, drilling fluids.
Mechanical Strengths: Highest tensile strength, exceptional resistance to extrusion and mechanical wear.
Best Suited For: Downhole tools, mud pumps, wellheads, and subsea drill strings.
- FKMroelastomer / AFLAS®) - AED Grade (Viton™ RGD) / FEPM (Fluo
Temp Range: -20°C to +210°C (-4°F to +410°F)
Pressure Rating: Up to 15,000 PSI
Media Compatibility: High CO2 content, aggressive hydrocarbon fluids, synthetic oils, moderate H2S.
Mechanical Strengths: Excellent high-temperature resistance and chemical stability against hydrocarbon solvents.
Best Suited For: Surface production valves, choke valves, compressors, and pipeline manifolds.
- FFKM (Perfluoroelastomer) - Ultra-AED Grade
Temp Range: -15°C to +315°C (+5°F to +599°F)
Pressure Rating: Exceeding 15,000+ PSI
Media Compatibility: Universal chemical resistance, extreme H2S concentrations, sour crude, aggressive amines, steam.
Mechanical Strengths: Maximum chemical inertness combined with extreme high-temperature elasticity and zero-decompression risk.
Best Suited For: Critical subsea Xmas trees, HPHT (High-Pressure High-Temperature) deepwater valves, and chemical injection systems.
Request Engineering Assistance & NORSOK Certified Formula Review
Do your oilfield pumps, HPHT compressors, or subsea valves have serious seal deterioration and early RGD failure?
Avoid taking a chance on expensive offshore downtime or catastrophic valve explosion. Get immediate engineering assistance from top sealing technology specialists in China.
Send in your application details for a review of a custom AED compound:
Please fill out the form below with your particular operating conditions, or send an email to our engineering team:
- Working Pressure and Depressurization Speed (e.g., 50 bar/min drop rate, 10,000 PSI)
- Temperature Range (Minimum and Maximum Operating Temperatures)
- Composition of Gas and Fluid Media (% CO2, % H2S, kinds of hydrocarbons, exposure to amines)
- Target Standard (API 6A Annex F, ISO 23936-2, NORSOK M-710 Rev 3)
Get in touch with SJK right now to talk about your pressing sealing issues!
Hot Tags: aed o ring, China aed o ring manufacturers, suppliers, factory, High Temperature O Ring Seals, Soft O Rings, High Density O-Rings, AED O Ring, Vacuum O Rings, High Density O Rings
Send Inquiry


