+8618268307911

Instructions for Use and Storage of Ball Valve O-ring

Jul 21, 2023

Instructions for Use and Storage of Ball Valve O-ring

 

O-ring is often used for ball valves. It plays a sealing role in static or moving state under the specified pressure, temperature and different liquid and gas media. Common materials include NBR, EPDM rubber, fluororubber, silicone rubber, Neoprene, natural rubber, Styrene-butadiene, etc. It is resistant to high temperature, acid, alkali, salt, aging, toxicity and odor, It is an ideal sealing product in high-temperature and corrosive liquid or gas media, and can be produced according to customer requirements to meet more customer needs. The precautions for the use and storage of spherical shapes include the following aspects:

 

1. The O-ring is generally not reusable

When installing the O-ring into the groove, be careful not to twist the O-ring

3. When installing the O-ring, it can be considered to apply sealing medium to the groove and O-ring

4. When the O-ring is not in use, try not to open the original packaging of the O-ring to avoid dust or foreign objects that may cause damage to the O-ring

5. The O-ring should be avoided from direct sunlight or placed near high-temperature heat sources such as boilers to avoid aging

6. The O-ring should avoid being tied and hung on needles or metal wires to prevent deformation of the O-ring and damage to the rear end

7 important special instructions early: Type love may occasionally experience discoloration during storage, which means that white powder is produced on the surface of the type, and which situation will not have a negative impact on the function of the type

 

The O-ring is suitable for dry installation on various ball valves, and serves as a seal under specified temperature, pressure, and different liquid and gas media, whether in a stationary or moving state. The O-ring of ball valve is mainly used for static sealing and reciprocating motion sealing. When used for rotary motion sealing, it is only limited to low-speed rotary sealing devices. The O-ring seal for ball valves is generally installed in a groove with a rectangular cross-section on the outer or inner circle to provide sealing. The O-ring still provides good sealing and shock absorption in environments such as oil resistance, acid and alkali resistance, abrasion, and chemical erosion. Therefore, the O-ring is the most widely used sealing element in ball valves.

Send Inquiry