-
Bearing Shield
Product name: bearing shield. Size: Standard, OEM/ODM. Material: FKM, NBR. Add to Inquiry -
Chemical Resistant Gasket
Size: Standard and Custom made. Material: Nitrile/NBR/Buna, FKM/FPM, Silicone, EPDM, HNBR, NR, FFKM, FEPM, etc. Add to Inquiry -
FDA Approved Gasket For Food
Size: Standard, OEM & ODM. Material: different of rubber, Composite material Add to Inquiry -
Nitrile Rubber Gasket
Product name: nitrile rubber gasket. Size: custom made. Material: Nitrile, NBR, Buna. Add to Inquiry -
Diaphragm Rubber Seal For Pump
Product name: diaphragm rubber seal for pump. Size: standard, custom made. Material: cloth reinforced rubber. Add to Inquiry -
Rubber Tube Sleeve
Size: Rubber tube sleeve. Color: Custom made. Material: Nitrile, EPDM, HNBR, FKM, etc.. Add to Inquiry -
AED Seal
Size: Standard, non-standard. Material: HNBR, FKM/Viton. Add to Inquiry -
HNBR Gasket
Size: OEM ODM . High temperature: 130~180℃. Low temperature: -55~-38℃. Add to Inquiry -
Flat O Ring Gasket
Size: custom made. Material: NBR, FKM, EPDM, Silicone, Fluorosilicone, HNBR, etc.. Add to Inquiry -
Gas Rubber Seal
Size: Standard, or non standard. Color: Black, as you need. Add to Inquiry -
Nitrile Rubber Seal
Size: Standard, or non standard. Color: Black, Red, Green, Blue, etc. Add to Inquiry -
Rubber Duckbill Check Valve
Size: non standard. Material: Silicone, NBR, EPDM, FKM, NR, etc.. Add to Inquiry
Oct 17, 2018 · Bearings have been the cornerstone of IBT Industrial Solutions since the company was founded in 1949. If you’re looking for the knowledge and expertise you need to select the best...
ENVIROPEEL USA 1128 South West Street, Indianapolis, Indiana 46225 Tel: +1 317 631-9100 Email: info@enviropeel-usa.com...
Mar 01, 2016 · “The selection of a shield or seal is dependent on the bearing application and environment,” said Picard. “Shields are metallic and there is no contact between the shield bore and the...
Shields are designed to prevent larger particles from entering the bearing and also to keep grease inside the bearing. They may be pressed into the bearing’s outer ring (non-removable)...
Fit shield to bearing, using zip and velcro strap to secure in place, ends can be cut and trimmed to suit bearing installation Once in position, the zips and...
Shields are good to around 350 F. ‘RS’ Type Seal – The ‘RS’ type seal is a rubber seal that makes contact with the inner race. Most commonly made of Buna-rubber. They are removable....











