+8618268307911
FKM O-ring Hardness

FKM O-ring Hardness

Viton Shore A Durometer Selection Guide & FKM O-Ring Hardness Chart
Hardness: 50-93 Shore A
Send Inquiry
Product Details ofFKM O-ring Hardness

Zhejiang Jiacheng New Material Co., Ltd. is one of the leading manufacturers and suppliers of fkm o-ring hardness in China, also supports customized service. Welcome to wholesale bulk high quality fkm o-ring hardness in stock here from our factory. If you have any enquiry about quotation and free sample, please feel free to email us.

 

EPDM Food Grade Rubber Gasket

Viton Shore A Durometer Selection Guide & FKM O-Ring Hardness Chart

To ensure zero-leakage sealing performance, avoid high-pressure extrusion, and maximize component service life, the proper FKM (Viton®) O-ring hardness must be chosen. The average range of standard Viton® O-rings is 50 to 90 Shore A (Durometer).

This dynamic selection guide offers thorough international hardness cross-references (Shore A vs. IRHD), pressure extrusion limit standards, and dynamic friction trade-offs to assist engineering teams in optimizing their sealing designs, whether they are designing hydraulic systems, chemical handling lines, or automotive fuel systems.

Request Aquote

 

IRHD vs. Shore A

 

The Shore A durometer (ASTM D2240) or International Rubber Hardness Degrees (IRHD, ISO 48) are the main tools used for hardness testing fluoroelastomer (FKM) O-rings. IRHD is specifically made for measurements of curved cross-sections, such O-rings, whereas Shore A is frequently used for normal flat test sheets.

 

Shore A Hardness (±5) Equivalent IRHD (±3) Primary Application & Sealing Characteristics Recommended Pressure Range (Dynamic)
50 Shore A 53 IRHD Ultra-soft, high conformity for low-torque, fragile plastic housings, or low-pressure vacuum seals. High dynamic friction. < 2.0 MPa (20 bar)
60 Shore A 63 IRHD Low compression set, superior sealing capability against rough surface finishes. Ideal for delicate medical and analytical equipment. < 3.5 MPa (35 bar)
70 Shore A 73 IRHD Standard Industry Grade. Optimal balance between flexibility, sealability, and tear resistance. Suitable for general industrial valves and pumps. < 7.0 MPa (70 bar)
80 Shore A 82 IRHD High-pressure resistance, enhanced wear/abrasion resistance. Commonly specified in automotive fuel systems and heavy-duty industrial hydraulics. < 10.0 MPa (100 bar)
90 Shore A 91 IRHD High-Pressure / Anti-Extrusion Grade. Superior resistance to gap extrusion and explosive decompression (AED). Used in downhole oil & gas tools and high-pressure hydraulic cylinders. < 15.0 MPa (150 bar)+

 

Engineering Impact Analysis: The Effect of Hardness on O-Ring Performance

 

Seals Solutions Silicone O-Ring

Three crucial operational factors-Gap Extrusion, Friction/Wear, and Sealing Life-must be balanced when choosing the best Viton durometer.

1. Pressure versus Extrusion Resistance
Softer FKM compounds (50–60 Shore A) have a tendency to flow into the clearance gap as working pressure rises, which can cause nibbling and early seal breakdown. Raising the hardness to 80 or 90 Shore A greatly improves resistance to shear strain, postponing extrusion failure without the need for backup rings.

2. Breakout torque and dynamic friction
Harder materials, such 90 Shore A, have less contact surface area when compressed, which reduces dynamic friction when moving continuously. Softer materials (60–70 Shore A) produce larger friction forces in dynamic rod/piston applications, but they offer a better initial seal at lower gland pressures.

3. Standard 70 Shore Compression Set & Long-Term Sealing Life The lowest compression set under prolonged heat exposure (-20°C to +200°C) is provided by an FKM. In extremely cold-temperature thermal cycling settings, ultra-hard compounds (90 Shore A) may somewhat shorten sealing life due to their slightly lower flexibility.

Maximum Allowed Clearance Gap (Extrusion Limits) for FKM O-Rings

 

Refer to the clearance gap (E-gap) guidelines based on the FKM durometer to avoid structural damage from high fluid pressure:

 

Pressure 70 Shore A Max Gap 80 Shore A Max Gap 90 Shore A Max Gap
35 Bar (500 PSI) 0.20 mm 0.30 mm 0.40 mm
70 Bar (1000 PSI) 0.08 mm (Back-up ring strongly recommended) 0.15 mm 0.25 mm
140 Bar (2000 PSI) Requires PTFE Back-Up Rings Requires PTFE Back-Up Rings 0.10 mm (Without back-up ring)

 

Do You Need a Custom FKM Hardness and Compound Suggestion for Your Project?

 

Avoid taking the chance of a seal failing because you choose the wrong durometer. For OEM/ODM projects, our senior sealing experts offer free technical evaluations, consulting on finite element analysis (FEA), and development of unique FKM formulations.

 

[Interactive Form for Technical Inquiries]
Operating Pressure (PSI/Bar):
Range of Temperatures (°C/°F):
[Dropdown: Oils, Fuels, Acid, Steam, Gas, Solvents, Other] Media/Chemical Contact
Application Type: [Vacuum, Static Flange, Dynamic Piston, Dynamic Rod]
[Dropdown: 50A / 60A / 70A / 80A / 90A / Engineer Recommendation] is the target shore A hardness (if known).
Company name and work email:

 

Request a Free Evaluation of Engineering Hardness

Get in touch with SJK right now to talk about your pressing sealing issues!

 

Common Questions Regarding FKM and Viton O-Ring Hardness

 

Q1: What is a Viton or FKM O-ring's typical hardness?

A: The worldwide standard for generic industrial FKM O-rings is 70 Shore A. It offers the perfect balance between chemical resistance, pressure tolerance up to 70 bar, and sealing flexibility.

Q2: For the O-ring hardness criteria, should I go with Shore A or IRHD?

A: Shore A micro-durometer measurements on small cross-section curved surfaces can introduce a 3–5 point variance, hence IRHD is more accurate for completed O-rings even though Shore A is frequently used in purchase orders.

Q3: Is it possible to swap out a backup ring with an 80 or 90 Shore A FKM O-ring?

A: In high-pressure applications (up to 100+ bar), upgrading from 70 Shore A to 90 Shore A greatly lowers the risk of extrusion. Regardless of hardness, anti-extrusion PTFE backup rings are still advised for pulsed hydraulic pressures over 140 bar.

Q4: Does increased hardness impact FKM's resistance to heat or chemicals?

A: Chemical or thermal limitations (-20°C to +200°C) are not intrinsically lowered by hardness alone (modified by carbon black or mineral fillers). Highly loaded 90 Shore A compounds, however, might exhibit somewhat reduced ultimate elongation.

 

 

Hot Tags: fkm o-ring hardness, China fkm o-ring hardness manufacturers, suppliers, factory, Metric Size VITON O Ring, O Ring FKM Viton, Black Elongation VITON O Ring, Viton FKM 80, Green Viton O Rings, FPM Mechanical Devices Rubber O Ring

Send Inquiry

(0/10)

clearall