Fluorine rubber (FKM) refers to a synthetic polymer elastomer containing fluorine atoms on the carbon atoms of the main chain or side chain. It has excellent high temperature resistance, high chemical stability, weather resistance, oxidation resistance, oil resistance and Very low breathability. In the military industry, FKM is mainly used in seals, oil pipes and electrical line sheaths for aerospace, aviation and launch vehicles, satellites, fighter jets, new tanks, etc. It is an irreplaceable key material in the cutting-edge national defense industry.
In 1957, DuPont developed the first FKM in order to meet the high requirements for sealing performance in the aerospace industry. In order to provide better thermal stability and solvent resistance, terpolymer fluoroelastomer containing tetrafluoroethylene (TFE) was developed in 1959. Currently, the more common FKM brands in the world include: Chemours' Viton®, Solvay's Tecnoflon®, 3M's Dyneon™ and Daikin's DAI-EL™.
1. A brief history of the development of fluororubber
Since the discovery of polychlorotrifluoroethylene and polytetrafluoroethylene, people have realized that fluoropolymers have excellent high temperature resistance and chemical inertness, and polytetrafluoroethylene has developed into the largest fluoropolymer industry. However, due to the performance characteristics of plastic itself, it still has major defects as a sealing material, and there is an urgent need for a fluoroelastomer sealing material.
The earliest fluorine rubber was poly-2-fluoro-1,3-butadiene and its copolymer with styrene, propylene, etc., which was trial-produced by DuPont in the United States in 1948. Its performance is no better than that of chloroprene rubber and butadiene rubber. , and it is expensive and has no actual industrial value. In the late 1950s, the American company Thiokol developed a binary nitrous fluororubber with good low-temperature performance and resistance to strong oxidants. Since then, fluororubber has entered practical industrial applications.
China has also developed a variety of fluororubbers since 1958, mainly polyolefin fluororubbers, such as type 23, 26, 246 and nitroso fluororubber. Later, a newer variety of tetrapropylene fluororubber was developed. , perfluoroether rubber, fluorophosphorus rubber.
2. Structure and characteristics of fluororubber
The molecular structure of FKM determines its excellent chemical stability and high temperature resistance. Fluorine atoms surround the carbon chain and fluorine-carbon bonds, making the carbon atoms less susceptible to attack by other chemicals, molecules, ions or atoms. In addition, the bond energy of the fluorine-carbon bond is very high, which also means that it is not easy to break and has very stable chemical properties.
In order to maintain the characteristics of elastomers, rubber products must be able to recover quickly after being squeezed by the outside world and deformed. Under normal circumstances, elastomers are three-dimensional network structures formed by cross-linking of molecular chains, and the restoring force after deformation comes from the tendency of molecular segments to return to disorder. Because fluorocarbon chains are more viscous than hydrocarbon chains, FKM often exhibits slow relaxation.
FKM usually consists of two or more monomers. The carbon chains polymerized from VF2 (or VDF), TFE, and ethylene monomers may lattice if they are long enough. Therefore, in order to form an amorphous polymer, some monomers with bulky side groups are added, such as hexafluoropropylene (HFP), fluorinated vinyl ether (PMVE), propylene, etc.
3. Types of fluororubber
According to ASTM D1418-2022, fluororubber can be divided into the following five types:
(1) Binary copolymer of hexafluoropropylene (HFP) and vinylidene fluoride (VDF). The binary copolymer is a standard type of FKM, with good performance in all aspects and is an all-round player. Type 26 fluororubber, commonly known as No. 2 rubber in China, is this type. It is currently the most common fluororubber variety, accounting for more than 80% of the entire fluororubber.
(2) Terpolymer of tetrafluoroethylene (TFE), hexafluoropropylene (HFP) and vinylidene fluoride (VDF). Terpolymers have a higher fluorine mass fraction than binary copolymers (usually 68% to 69%), so they have better chemical resistance, especially hydrocarbon resistance. In addition, it has better high-temperature resistance and can be used for a long time in environments above 250°C, but its pressure-bearing capacity and elasticity in low-temperature environments will be reduced accordingly. Type 246 fluororubber, commonly known as No. 3 rubber in China, belongs to this category.
(3) Terpolymer of tetrafluoroethylene (TFE), fluorinated vinyl ether (PMVE) and vinylidene fluoride (VDF). The addition of PMVE makes the product more elastic at low temperatures than the first two types of products. The mass fraction of fluorine element in this FKM is between 62% and 68%.
(4) Tetrafluoroethylene (TFE), propylene and vinylidene fluoride (VDF) terpolymer. This kind of FKM has increased resistance to alkali and other polar solutions, but its swelling performance has deteriorated, and its fluorine element mass fraction is about 67%.
(5) Five-membered copolymer of tetrafluoroethylene (TFE), hexafluoropropylene (HFP), ethylene, fluorinated vinyl ether (PMVE) and vinylidene fluoride (VDF). This type of FKM is known for its resistance to polar solutions and high temperature hydrogen sulfide.
